Our Excellent Produce Process——Wonderful Carbon Fiber Pole
Introduction Of Our Produce Process 1. Pattern Cutting The Pre Preg is cut into specific shapes known as patterns which vary in shape, size and type of weave of cloth. The Tube design is very much affected by the 'cut of the cloth, number of layers and the patterns used. These patterns are cut using the computer controlled plotting machine to very high accuracy and very tight tolerances. 2. Rolling Tube The edges of the cut patterns are adhered to the mandrel with pressure to fix the leading edge of the patterns to the mandrel. Then mandrel with carbon fibre patterns loaded is then rolled between the plates of a special high pressure table to ensure that the patterns are tightly compacted without any rucks or ridges giving a uniform surface finish. 4. Pressure taping The rolled carbon tube on the mandrel is then spun whilst applying the heat shrink wrap cellophane tape adding the pressure onto the mandrel with great force. The heat shrink wrap process gives the very fine ci